|
Steel Production Mill Stands Unimeec provides a complete mill stands for the rolling of wire rods / TMT / Light Section / Medium Section & Heavy Sections / Sheet mill. Technicalities of our mill stands are as follows:
|
a.
|
Type
|
4Hi, 3Hi & 2Hi Horizontal Stands, 2Hi Vertical Stands, Edger mill stands.
|
|
b.
|
Housing Material
|
Steel Casting / Cast Iron / Steel Fabricated
|
|
c.
|
Size
|
6"- 24" i.e. from 150mm PCD to 750mm PCD Mill
|
|
d.
|
Bearing Type
|
Antifriction Spherical Roller Bearing / Multi Row Bearing / Fibre Bearing / Gun Metal Bush
|
Our Complete Mill Stand includes the following accessories as and where required:
- Pressure Bolts with Worm Wheel Arrangement on top( Horizontal stands) and on side (vertical stands).
- Steel Fabricated Rest Bars & Side Bars.
- Adjustment Screws and L-Keys.
- Wear & tear Plate on the inside of Mill Stands for Long Life.
- Bearing Chocks / Forged Steel Chocks with One Set of Roller Bearings / Fibre Bearings.
- Universal Couplings / Cast Iron Couplings, Star Grove / Key type to suit.
- Spindles manufactured out of Forged Steel, Star / Key type.
- Tie Rods with Nuts & Spacers.
- C.I. Foundation Rails along with Foundation Bolts with Nuts & Spacers.
- Tee Bolts with Nuts & Spacers.
Fly-wheel A flywheel is a rotating mechanical device that is used to store rotational energy. Flywheels have a significant moment of inertia, and thus resist changes in rotational speed. As Steel Rolling mill is a process which is at any time of rolling undergoes change in load demand, hence flywheel supply that extra energy stored in it to suppress RPM change due to change in load demand. Unimeec designed flywheel are optimally designed for specific process. Reduction gear boxes, in single and multiple stage A reduction gear box consists of a connected set of rotating gears through which power is transmitted; this is to accustom high speed motors with steel mill rolling requirement in reduced RPM and enhanced torque output. Unimeec can manufacture and supply single stage, double stage or multistage gear boxes having Single and Multiple outputs as required. Pinion for multiple outputs Pinion is basically a multiple output gearbox, this gear box basically are of 2Hi and 3Hi. Specially designed 4Hi and 5 Hi pinions is also manufactured. Unimeec’s designed unit transfers single input shaft power to various or same speed multiple outputs. Speed increasers A speed increaser gear box consists of a connected set of rotating gears through which power is transmitted; this is to accustom high speed motors with steel mill rolling requirement in enhanced RPM. We can manufacture and supply single stage, double stage or multistage gear boxes having Single and Multiple outputs as required. They usually come with pinion gear box coupled in a single gear box.
|
